Is your garage door sick?
Call the Doc!

303-345-4707

davelog
Denver Garage Door Spring - How to Replace Garage Door Torsion Spring
The garage door springs are some of the most important components of your garage door. They control the operation of the garage door, handle a lot of tension and ensure the right balance of the door.


With continued use, the springs wear out or break requiring replacement to ensure proper operation of the garage door. If you notice that your garage door is not opening evenly, it is time to replace the garage door springs.


Here is a guide on how to replace garage door torsion springs.


What You Will Need


To replace garage door springs or repair broken garage door spring, tools you will need include vice grips or C-clamps, a heavy-duty eyebolt and the replacement springs. You will also need to wear safety gear including work boots, safety glasses and gloves.


If you want to replace garage door springs on your own, you should have the technical skills, experience and confidence that you can complete the job accurately and safely.


Note of Caution: Torsion springs are wound tight, under severe pressure and can cause serious injury or death. Only a trained Denver garage door service professional should replace torsion springs.


Put Safety First


The heavy weight and large size of the garage door exerts a lot of tension on the springs making them very risky to handle. To prevent accidents and injuries, ensure you have the right tools, safety gear and the technical skills required and understand the replacement instructions and directions to replace or repair the garage door torsion springs on your own without professional help.


Determine the Specific Type of Spring System


The directions for replacing garage door torsion springs depend on the torsion spring system for your garage door. The first step is to determine the type of torsion springs system your garage door has. Some of the torsion spring system can be very difficult and even dangerous for homeowners to replace on their own. When purchasing the replacement garage door springs, you should know the weight of your garage door, the size dimensions, model, track raids, and cable drum number so you can get the right springs for your garage door.


How to Replace Garage Door Springs


•Measure and compare the old and new torsion springs to ensure that you install the correct springs for your garage door.
•Unwind the old springs while handling the springs carefully to prevent the cone from slipping.
•Loosen the torsion hardware by turning and removing the two bolts that hold the torsion to the spring bracket.
•To replace the torsion springs, slide the drum further from the bearing plate. Slide the drum on the shaft and then slide the shaft back into the bearing and then wind the new springs.
•Check and lubricate the garage door and adjust the vise grip to ensure that the springs are not wound too strong.
•Reconnect the garage door opener, connect the power cord and adjust the opener force to your satisfaction.


How to Replace Garage Door Torsion Spring


Torsion springs are located along the top of the garage door. Repairing or replacing torsion springs is a very dangerous activity especially for homeowners who have no technical skills and experience.


If your garage door has garage door torsion springs, hire a Denver garage door torsion spring replacement specialist to replace or repair damaged garage door spring in Denver, Colorado.


Whether you choose to hire a professional to replace or repair damaged garage door spring, knowing what garage door spring replacement involves will help you ensure a safe process.


If you are confident you can replace the garage door springs on your own, remember to observe safety precautions to prevent accidents and injuries. If you don’t have the skills or experience, the best thing is to rely on a professional Denver garage door repair expert to do the job for you.

 

Garage Door Opener Special

Liftmaster garage door opener with 2 remotes and Keyless entry installed
Only $395.00
Call for details and mention this ad
16x7 Non-Insulated Door
Only $879.00 (950.00 value)
Call for details and mention this ad
16x7 R-10 Insulated Garage Door
Only 1,199.00 installed ($1,300.00 Value)
Call for details and mention this ad
Contact Us Now!
formhead